Foundation drilling tools
Round shank picks and holders for rotary drilling rigs. Six pick types, plus flap teeth and roller bits for rock socketing.
9 sections
View range
Cutting tools
Cutting teeth are the wear parts that cut rock, soil and concrete on rotary drilling rigs, casing rigs, roadheaders and milling machines. The range is grouped by machine and application into 15 groups, from piling and casing to trenching, milling and coal drilling. To choose, start from the machine and the ground, then match shank diameter and holder.
15 product groups
Roller bits
Roller bits on the bucket bottom for rock socketing. Weld-on straight shank or bolt-on removable type.
2 sections
View range
Casing tools
Picks cutting the casing shoe, concrete and rebar. Weld-on bars, quick-change picks, screw-in types and 26/40 mm teeth.
5 sections
View range
Rotary casing tools
Casing teeth for rotary casing rigs in 40, 45 and 50 mm shank, plus inner casing teeth for cleaning out.
4 sections
View range
Diaphragm wall (DWC) tools
Picks, flat cutter teeth, mixing tools, wear parts and bucket teeth for diaphragm wall grabs and cutters.
5 sections
View range
Soil mixing wall tools
Mixing head teeth for soil mixing rigs and SMW augers, blending soil and cement slurry into a wall.
1 section
View range
Mining & tunnelling tools
Picks for roadheaders, shearers and tunnelling machines, 25 to 42 mm shank, in coal and medium-hard rock.
5 sections
View range
Trenching tools
Trencher picks, 19 to 38 mm shank, step and round, for pipeline trenches, cable ducts and asphalt.
4 sections
View range
Road rehabilitation tools
Planer, stabiliser, snow plough and grader tooling: 20 and 22 mm picks, milling and stabiliser teeth, blades, holders.
6 sections
View range
HDD tools
Round shank picks and cutter tools for HDD reamers and pullback, widening the bore under roads and rivers.
2 sections
View range
Coal mining tools
Picks and parts for shearers, roadheaders and roof bolters, 20 to 43 mm shank, with blocks, sleeves and roof bits.
8 sections
View range
PDC bits
PDC conical cutters for roof bolter and water well bits, wearing longer than carbide in medium-hard rock.
1 section
View range
TBM tools
Cutter blocks for shield and TBM cutterheads, brazed carbide strips on a rectangular body, sized to the seat.
1 section
View range
Rock drilling tools
Chisel and cross bits for hand-held and air-leg drills, 7 degree taper, 30 to 50 mm, for blast holes.
1 section
View range
Carbide inserts & circlips
Carbide inserts for bit bodies, pick bodies and cones, button and conical, with the circlips that lock them in.
3 sections
View range